ADTRAN TRACER 6000 SERIES, Руководство пользователя

Страница: 82 / 126

Section 5 User Interface Guide TRACER 6000 Series Split System Manual
82 612806320L1-1B
> M
ANAGEMENT
/SNMP P
ORT
C
ONFIGURATION
> SNMP G
ET
C
OMMUNITY
Defines the community name for Get access (to poll the TRACER for status information). This value must
match the Get name defined on the network management stations (NMS). Get access is read only access.
The default name is
public .
> M
ANAGEMENT
/SNMP P
ORT
C
ONFIGURATION
> SNMP P
UT
C
OMMUNITY
Defines the community name for Set access (to change TRACER configuration parameters through
SNMP). This value must match the Get or Set name defined on the NMS. The default name is
private .
> M
ANAGEMENT
/SNMP P
ORT
C
ONFIGURATION
> SNMP T
RAP
C
OMMUNITY
Defines the community name for trap destinations. This name must match the community name defined on
the NMS. The default name is
SNMP_trap .
> M
ANAGEMENT
/SNMP P
ORT
C
ONFIGURATION
> SNMP T
RAP
H
OST
#0 - #4
Identifies the IP address in dotted decimal notation of the NMS for the TRACER to send SNMP traps to.
Up to five trap destinations can be entered.
> P
ING
U
TILITY
Figure 31 shows the Ping Utility menu page, which contains the parameters for performing a ping test out
of the 10/100BaseT/TX
MGMT Ethernet interface.
Figure 31. Ping Utility
> P
ING
U
TILITY
> P
ING
A
DDRESS
Specifies the IP address to ping (in dotted decimal notation).