C N C 4 2 2 0 M a c hi ne Too l Op e ra t ion an d Te st
30
2) Press the
key to display the previous page of the program (when the program is
in the first page, the
key is invalid), the cursor locates the start of previous page; press
the
key to display the next page of the program (when the program is in the first page,
the
key is invalid), the cursor locates the start of next page. Press and hold the
key
to turn pages consecutively.
◆
Searching (instruction word): search for specified instruction word upwards or downwards from
the cursor position. The current position of the cursor is N0030, now move the cursor to Z9.5;
The operation method follows:
1) Press the address key
, number key
and
in sequence;
2) Press the
key and the system starts searching downwards; after that, the cursor locates
address Z9.5. If you press the
key to search upwards, the system can’t find instruction word
Z9.5, and alarms.
Note: to search for Z9.5, please input Z9.5 exactly; if you input Z9.50 only, the system can’t
find Z9.5.
◆
Searching (address): search specified address upwards or downwards starting from current
position. The current position of the cursor is N0030, now move the cursor to Z14;
Program
Data=
Editing mode
Program
Data=
Editing mode
Searched!
Not searched!