ADT-09 Series Motion Control Card
47
To verify whether the configuration of the pulse mode, the limit mode, the pulse
equivalent, the servo pulse subdivision and other parameters are reasonable and
effective, observe the actual driving speed, the stop information when the driving is
finished, and the position measurement after the driving is done.
The basic debugging of the control card has been verified at this time. Where
there is no abnormality found in the above process, the control card hardware is
correctly connected and the function is effective. For the rest of the functions, refer to
the introduction of other functions in the “09 Series Motion Control Card
Programming Manual.pdf” to enable configuration and debugging.
