Hybrid Standalone NVR User Guide
Load balance:
In this mode, device uses bond0 to communicate with the external device. The eth0
and eth1 are both working now and bearing the network load. Their network load are general the
same. The system is shown as offline once these two cards are both offline. Note these two cards
must be in the same LAN.
After completing the setup, click the
Save
button. The system returns to the previous menu.
3.8.5.1
Network Setting
The Network Setting dialog is shown in Figure 3-43. Check the box to enable corresponding function
and then double click the item to open its setup dialog.
Figure 3-43
NVR32xx-P Series User Guide
65
