ADT iCenter 8142ADT, Руководство пользователя

Страница: 82 / 136

TeleSMART Messaging Features (cont'd)
82
TeleSMART Operation Using a Telephone
TeleSMART lets you use a telephone to access some of the system’s functions and
control the security system. TeleSMART also offers several telephone calling
options, including memory dialing (quick dialing of a pre-programmed number), last
number redial, and repeat dialing (automatically redial busy numbers). See
M
aking
Telephone Calls later in this section for procedures on using these calling features.
To Use Tele
S
M
AR
T From a Telephone
You can control TeleSMART’s typical operating functions from a telephone, but you
cannot perform most system programming functions, (which can be done only from
a TeleSMART keypad). In addition to these restricted telephone functions, the menu
structure for accessing these functions is different from that used with a
TeleSMART keypad. Refer to the Telephone Access Menu Map on the next page to
help navigate the menu system.
1. Pick up any telephone handset (if calling from a remote phone, dial your home
number and do step 2 during the greeting message).
2. Press # , then enter your access code, then press
∗
.
For example, if the access code is “5678”: press # [5-6-7-8]
∗
.
3. The Main Menu options are announced in numerical order (see the table below).
Select the desired menu option by pressing the corresponding option number on the
telephone keypad at any time.
NO
TE:
While using TeleSMART from a telephone, the system is unable to receive
calls.
The following table lists the functions that you can perform from a telephone.
From a Telephone, You Can… By Pressing…
Control the security system [1] then desired arming command
Listen to your messages [2]
Record a memo [4] then follow the prompts
Record a greeting [7] [2] then follow the prompts
Turn privacy on/off [7] [1] [3]
Turn toll saver on/off [7] [1] [4]
Turn the CID display on/off [7] [1] [6]
Turn keypad CID announcement on/off [7] [1] [1] [1]
Turn aux CID announcement on/off [7] [1] [1] [2]
Set the aux speaker volume [7] [1] [1] [4]
Turn message beeps on/off [7] [1] [2] [4]
Turn call screening on/off [7] [1] [2] then follow the prompts