ADT iCenter 8142ADT, Руководство пользователя

Страница: 76 / 136

TeleSMART Messaging Features (cont'd)
7
6
ENTER LOCATION
-- (01-25) # - END
LOC XX MB XX RN XX
(XXX) XXX-XXXX
(Caller ID Review Prompt)
3. Press [1] from the previous prompt, then enter the 2-digit location
number for storing Caller ID settings for a particular phone number.
The system displays the current settings for this location, where:
LOC = location no. (01-25); MB = mailbox (1-4)
RN = distinct ring count (2-5); “x” = phone number
The system automatically advances to the next prompt.
DISTINCT RING?
1-YES 2-NO 8-MNU
ENTER DIST. RNG:
-(0, 2-5) #-END
4. Press [1] (yes), then enter the distinctive ring count (2-5) for calls
from this phone number.
The distinctive ring lets you identify a caller by the number of short
rings the system makes when calls are received from that caller.
The system automatically advances to the next prompt.
To skip the “Distinct Ring” prompt, press [2] (no).
MAILBOX?
1-YES 2-NO 8-MNU
ENTER MAILBOX:
-(1-4) #-END
5. Press [1] (yes), then enter the mailbox number where you want
messages received from this phone number to be stored.
The system automatically advances to the next prompt.
To skip the “Mailbox” prompt, press [2] (no).
VOICE TAG?
1-YES 2-NO 8-MNU
VOICE TAG:
1-REPEAT
6. Press [1] (yes) if you want to record a voice tag for this phone
number. If a voice tag is recorded, it is announced when calls from
this number are received.
Select from the options described below:
(Pressing [
∗
] or [#] displays the choices on the bottom line.)
Voice Tag Menu
1 – Repeat Press to play back voice tag. VOICE TAG:
RECORD AT TONE!
3 – Erase Press to erase the voice tag.
6 – Record Press to begin recording voice tag (see display at
left). Press any key to stop the recording.
8 – Menu Advances to the “Override Privacy” prompt.
After voice tag is recorded, press [8] to continue.
To skip the “Voice Tag” prompt, press [2] (no).
When finished, press [8] to return to the Caller ID Location prompt, then press [8]
again to return to the Main Menu, or press [9] to exit the system.