ADT iCenter 8142ADT, Руководство пользователя

Страница: 71 / 136

TeleSMART Messaging Features (Cont'd)
71
Toll
S
aver / Message Beeps Using the Tele
S
M
AR
T Touchpad (
O
ptions 12 &
13)
09
Touchpad CID
10
Aux CID
11
Aux Volume
12
Toll Saver
13
Message Beeps
14
HF Touchpad
15
HF Aux
16
Handset On/Off
NAVIGATION: [
∗
] = Next Option; [#] = Previous Option; [7] = GOTO prompt; [9] = Exit System.
About the Toll Saver Feature
The Toll Saver feature lets you call in to the system to check if there are new
messages (determined by the number of rings). This lets you hang up before
incurring toll charges.
The Toll Saver feature works in combination with the security system. First, you
must turn Toll Saver on (shown below), but it becomes active only when the security
system is armed in the AWAY or MAXIMUM mode. The Toll Saver feature is
inactive when the security system is disarmed or when armed STAY or INSTANT.
When Toll Saver is active (option is on and system is armed AWAY or MAXIMUM), the
“distinctive ring” feature is automatically disabled.
How to Turn Toll Saver On/Off
PROGRAM MODE
12 TOLL SAVE:ON
Toll Saver:
1. Go to the “Toll Saver” prompt (option 012).
2. To turn the Toll Saver feature on, press [0].
To turn Toll Saver off, press [0] again.
How to Check for Messages while Toll Saver is On
1. Call in to the system and listen for the number of rings:
2 rings = There are new messages/memos in one or more of the mailboxes
4 rings = There are no new messages/memos in any of the mailboxes
2. To save toll charges if there are no new messages, hang up after the third ring.
About Message Beeps
The system can alert you to new messages whenever you pick up the telephone
receiver, if desired. If the message beeps feature is turned on and you have new
messages, the system beeps over the dial tone when you pick up the receiver.
How to Turn Message Beeps On/Off
PROGRAM MODE
13 MSG BEEP:ON
Message Beeps
1. Go to the “Message Beeps” prompt.
2. To turn Message Beeps on, press [0].
To turn Message Beeps off, press [0] again.