ADT A-ADRP16E-320, Руководство пользователя, Страница: 64 / 94

User’s Manual
Network Setup Screen
In the Network Setup screen you can set up the DVR for LAN connections.
Figure 63 — Network Setup screen.
Highlight the box beside
Connection
. Press the button to toggle between
LAN
and
Modem .
Highlight the box beside Admin Password and press the button. A virtual keyboard
appears. You will first be asked to enter the current password. Then you can enter a new
password; you will be asked to confirm the new password before it is accepted.
Highlight the box beside User Password and press the button. A virtual keyboard appears.
You will first be asked to enter the current password. Then you can enter a new password; you
will be asked to confirm the new password before it is accepted.
NOTE: These passwords are for network use. They are different from the Admin and
User passwords for the DVR itself.
NOTE: The passwords are case sensitive. The factory default password for both
Administrator and User is
12345678 .
CAUTION: Write the password down and keep it in a safe place. Once the
password has been reset, the default will no longer work. If the password is
forgotten, the unit must be reset using the
Factory Reset Button and all data
settings will be lost.
Highlight the box beside
Transfer Control
. Press the button to toggle between
On
and
Off
.
When it is
On
, you can set the transfer speed and remote quality of the image transferred to a
computer running RAS (Remote Administration System).
54