ADT A-ADRP16E-320, Руководство пользователя, Страница: 27 / 94

Digital Video Recorder
The Quick Setup screen allows you to set up the most commonly used features of your DVR.
Use the arrow buttons to move through the options. Pressing the button lets you make your
selections.
Highlight the box beside
Quick Setup
and press the button to toggle between
On
and
Off
.
If you select
Off
, you will use the
Normal Setup
screen to change the DVR’s settings.
Highlight the Record Speed box and select recording speeds from as few as one image every
10 seconds to as fast as 60 ips.
NOTE: The DVR has a maximum recording speed of 60 ips per camera, however, the
recording speed may not be achieved when averaged over all cameras.
Highlight the
Record Quality
box and select from
Very High
,
High
,
Standard
and
Low
.
Highlight the box beside
Audio Recording
and select either
On
or
Off
.
NOTE: It is the user’s responsibility to determine if local laws and regulations permit
recording audio.
Highlight the box beside
Sequence Dwell Time
and select from 3 to 60 seconds for the camera
sequence dwell time.
Selecting
System Information…
enters that screen.
Selecting
Storage…
enters a screen where you can check the storage status.
Selecting
Camera…
enters a screen where you can set up camera information.
Selecting
Network Setup…
enters a screen where you can set up network information.
Selecting
Password…
enters a screen where you will be able to change passwords.
Selecting Date/Time… enters a screen where you will be able to set the DVR’s time and date.
Selecting System Shutdown… shuts the DVR down. When shutting down the DVR, you
need to confirm that you want to shut down the unit, you will be asked for an administrator
password.
NOTE: The Quick Setup mode will be released automatically when the user changes the
DVR settings remotely using the RAS(Remote Administration System) program.
17