ADT A-ADRP16E-320, Руководство пользователя, Страница: 14 / 94

User’s Manual
Your DVR can be used with either NTSC or PAL equipment. Before turning on the DVR, set
the switch to NTSC or PAL to match your equipment.
NOTE: You cannot mix NTSC and PAL equipment. For example you cannot use a PAL
camera and an NTSC monitor.
CAUTION: If you set the switch from NTSC (PAL) to PAL (NTSC), please do the
Factory Reset and Clear All Data . If not, it causes the DVR to perform wrong
operations.
Connecting the Video Source
Figure 4 — Video input connectors (1).
Connect the coaxial cables from the video sources to the BNC
Video In
connectors.
Figure 5 — Video input connectors (2).
Connect the RJ-11 cables from the observation cameras to the modular RJ-11 connectors.
CAUTION: Do NOT attempt to use the modular input and BNC input for the same
camera port.
Connecting the Loop Through Video
Figure 6 — Video Loop Through connectors.
If you would like to connect your video source to another device, you can use the
Loop
BNC
connectors.
NOTE: The Loop BNC connectors are auto terminated. Do NOT connect a cable to the
Loop BNC unless it is connected to another terminated device because it will cause poor
quality video.
4