manualshive.com logo in svg

ADLINK Technology DAQ-20 Series, Руководство пользователя

Поделиться
Скачать
ADLINK Technology DAQ-20 Series Скачать руководство пользователя страница 18

 

Introduction 

•

 9 

♦ 

Storage Environment

 

• 

Ambient temperature:

 -20 to 80

°

C 

• 

Relative humidity: 

5% to 95% non-condensing 

♦ 

Interface Connector: 

68-pin AMP-787254-1 or equivalent

 

1.4 

Software Support 

ADLINK provides versatile software drivers and packages for users’ dif-
ferent approach to building up a system. ADLINK not only provides pro-
gramming libraries such as DLL for most Windows based systems, but also 
provide drivers for other software packages such as LabVIEW

®

.  

All software options are included in the ADLINK CD. Non-free software 
drivers are protected with licensing codes. Without the software code, you 
can install and run the demo version for two hours for trial/demonstration 
purposes. Please contact ADLINK dealers to purchase the formal license. 

1.4.1 

Programming Library 

For customers who are writing their own programs, we provide function 
libraries for many different operating systems, including: 

• 

D2K-DASK: 

Include device drivers and DLL for 

Windows 98

, 

Windows NT

 and 

Windows 2000

. DLL is binary compatible across 

Windows 98, Windows NT and Windows 2000. This means all ap-
plications developed with D2K-DASK are compatible across Win-
dows 98, Windows NT and Windows 2000 . The developing envi-
ronment can be VB, VC++, Delphi, BC5, or any Windows pro-
gramming language that allows calls to a DLL. The user’s guide and 
function reference manual of D2K-DASK are in the CD. 
(\\Manual_PDF\Software\D2K-DASK)

 

• 

D2K-DASK/X: 

Include device drivers and shared library for Linux. 

The developing environment can be Gnu C/C++ or any program-
ming language that  allows linking to a shared library. The user's 
guide and function reference manual of D2K-DASK/X are in the CD.  
(\Manual_PDF\Software\D2K-DASK-X.) 

Содержание DAQ-20 Series










































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды