ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 27
Vizi Beam Hybrid 2R
System Menu
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Pan Reverse” is displayed,
and press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Tilt Reverse - With this function you can reverse the Tilt movement.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Tilt Reverse” is displayed, and
press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Pan Degree - With this function you can change the pan degree from
630 to 540.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Pan Degree” is displayed, and
press ENTER.
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 32
Vizi Beam Hybrid 2R
System Menu
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Key Lock - With this function activated the buttons will lock autom-
matically after 15 seconds.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Display Setting” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Key Lock” is displayed, and
press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Temperature C/F - With this function, you can change the tempera-
ture display to show either Celsius or Fahrenheit.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press UP or DOWN buttons, until “Temperature C/F” is dis-
played, and press ENTER.
3. Either “Celsius” or “Fahrenheit” will be displayed, use the UP and
DOWN buttons to toggle between.
4. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Initial Status- In this menu you are able to check initial effect posi-
tion.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
