ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 20
the lamp.
1. Press the MODE/ESC button to access the main menu. Press
the UP or DOWN buttons so that “Information” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Last Run Time” is displayed,
and press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the last running
time.
5. Press ENTER or press MODE/ESC to exit.
Lamp Hours - This will allow you to check the running time of the
lamp.
1. Press the MODE/ESC button to access the main menu. Press
the UP or DOWN buttons so that “Information” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Lamp Hours” is displayed, and
press ENTER.
4. “XXXX” will now be displayed. “XXXX” represents the lamp run-
ning time.
5. Press ENTER or press MODE/ESC to exit.
Lamp Off Time - This will allow you to check the running time of the
lamp the last time that the lamp was On.
1. Press the MODE/ESC button to access the main menu. Press
the UP or DOWN buttons so that “Information” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Time Information” is dis-
played, press ENTER.
Vizi Beam Hybrid 2R
System Menu
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 39
missing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
05Er – COLOR WHEEL error:
This message will appear after a fixture reset, if the head’s mag-
netic-indexing circuit malfunctions (sensor failed or magnet is
missing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
06Er – FIXED GOBOS error:
This message will appear after a fixture reset, if the magnetic-
indexing circuit malfunctions (sensor failed or magnet is miss-
ing) or there is a stepper motor failure (defective motor or a
defective motor IC drive on the main PCB).
Vizi Beam Hybrid 2R
Error Codes
