ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 26
Vizi Beam Hybrid 2R
System Menu
On again manually.
PERSONALITY
Time Information
Address via DMX - With this function you can adjust the DMX
address via external controller.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “Address via DMX” is dis-
played, and press ENTER.
4. Either “Off” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to
exit.
No DMX status - With this function if the DMX signal is suddenly
lost, the unit will automatically go into 1 of 3 modes.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Status Setting” is dis-
played, press ENTER.
3. Press UP or DOWN buttons, until “No DMX Status” is displayed,
and press ENTER.
4. Either “Hold” (Last DMX setting), “Close” (Blackout), “Music”
(Sound Active), or “Auto” (Auto Program) will be displayed, use the
UP and DOWN buttons to toggle between.
5. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Pan Reverse - With this function you can reverse the Pan movement.
Vizi Beam Hybrid 2R
System Menu
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 33
ENTER.
2. Press the UP or DOWN buttons until “Initial Status” is displayed,
press ENTER.
3. “XXX” will be displayed. “XXX” represents the current effect posi-
tion.
4. Press ENTER or press MODE/ESC to exit.
Reset Default -
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Personality” is highlighted, then press
ENTER.
2. Press the UP or DOWN buttons until “Reset Default” is displayed,
press ENTER.
3. Either “Off” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
4. Press ENTER to confirm your selection or press MODE/ESC to
exit.
RESET FUNCTION
Reset All - With this function you can all the motors.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Reset Function” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Reset All” is displayed,
press ENTER.
3. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Rest Pan & Tilt - With this function you can reset the Pan & Tilt
motors.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Reset Function” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Reset Pan/Tilt” is dis-
