ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 24
Vizi Beam Hybrid 2R
System Menu
press ENTER.
2. Press the UP or DOWN buttons until “Automatic On” is displayed,
press ENTER.
3. Either “Off” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
4. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Lamp on via external controller - With this function you can select
if you want to switch the lamp on via an external controller. This is
used in conjuction with Internal Programs DMX channel, DMX values
40-59.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Lamp Control” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Lamp On Via DMX” is dis-
played, press ENTER.
3. Either “Off” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between. Select “On” if you wish to activate this func-
tion, or “Off” to deactivate.
4. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Lamp off via external controller - With this function you can select
if you want to switch the lamp off via an external controller. This is
used in conjuction with Internal Programs DMX channel, DMX values
60-79.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Lamp Control” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Lamp Off Via DMX” is dis-
played, press ENTER.
3. Either “Off” or “On” will be displayed, use the UP and DOWN but-
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 35
Vizi Beam Hybrid 2R
System Menu
2. Press the UP or DOWN buttons until “Reset Others” is displayed,
press ENTER.
3. Press ENTER to confirm your selection or press MODE/ESC to
exit.
EFFECT ADJUST
Test Channel - With this function you can test/correct each channel
function.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Effect Adjust” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Test Channel” is displayed,
press ENTER.
3. Use the UP or DOWN buttons to scroll through the various chan-
nels.
4. Press ENTER or press MODE/ESC to exit.
Manual Control - With this function you can easily adjust the lamp.
All effects will be canceled, the shutter will open and output intensity
will be 100%. With the individual functions you can focus the light on
flat surface (a wall) and finely adjust the lamp.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Effect Adjust” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Manual Control” is dis-
played, press ENTER.
3. Use the UP or DOWN buttons to scroll through the various func-
tions. Press ENTER when you find the function you would like to
adjust.
4. Press ENTER or press MODE/ESC to exit.
Calibration - With this function you can calibrate and adjust the
