ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 23
Vizi Beam Hybrid 2R
System Menu
3. “Head Temperature” will now be displayed, press ENTER.
4. “XXX” will now be displayed. “XXX” represents the current tem-
perature of the moving head.
5. Press ENTER or press MODE/ESC to exit.
Software Version - This will allow you to see the software version
you are currently running.
1. Press the MODE/ESC button to access the main menu. Press
the UP or DOWN buttons so that “Information” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Software Version” is dis-
played, press ENTER.
3. “VX.X” will now be displayed. “X.X” represents the software ver-
sion.
4. Press ENTER or press MODE/ESC to exit.
LAMP CONTROL -
Lamp On/Off - With this function you can switch the lamp on or off
via the control board.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Lamp Control” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Lamp Off/On” is displayed,
press ENTER.
3. Either “Off” or “On” will be displayed, use the UP and DOWN but-
tons to toggle between.
4. Press ENTER to confirm your selection or press MODE/ESC to
exit.
Automatic On - With this function you can have the lamp automati-
cally turn On when when switching on the power.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Lamp Control” is highlighted, then
ADJ Products, LLC - www.adj.com - Vizi Beam Hybrid 2R Instruction Manual Page 36
Vizi Beam Hybrid 2R
System Menu
effects wheels to their correct positions. The Calibration password
050.
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “Effect Adjust” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “Calibration” is displayed,
press ENTER.
3. “XXXX” will be displayed. The password is 050.
4. Press ENTER to confirm or press MODE/ESC to exit.
USER MODE SET
User Mode -
1. Press the MODE/ESC button to access the main menu. Press the
UP or DOWN buttons so that “User Mode Set” is highlighted, then
press ENTER.
2. Press the UP or DOWN buttons until “User Mode” is displayed,
press ENTER.
3. Use the UP or DOWN buttons to scroll through the 3 DMX Channel
Modes.
Standard Mode - This is 12 Channel Mode.
Basic Mode - This is 10 Channel Mode.
Extended Mode - This is 16 Channel Mode.
4. Press the MODE/ESC button once to return to the “User Mode
Set” menu. Use the UP or DOWN buttons to scroll through the Edit
modes. Press ENTER to select any of the Edit modes.
Edit User Mode – This function allows the user to make the actual
changes in the user defined modes that are created in the previous
function.
EDIT PROGRAM: - The fixture comes equipped with a built-in DMX
recorder that allows custom programs to be installed and recalled
directly from the fixture’s control board. Programs can be created
