ADEMCO N7227V5 страница 7 Скачать руководство пользователя | Manualshive

Страница: 7 / 88

background image

– 7 –

HOW TO USE THIS MANUAL

This manual is written to accommodate both the new and the experienced installer of
Ademco products. A general description of the entire system is located in the first
section of this manual. This includes the various features available and the optional
peripheral devices that the system can support.

This manual is divided into separate sections. A section covering the hardwired zones
(1–6) provides complete information on the capabilities of each basic hardwired zone,
including its usage, programming, and a checkout procedure. Separate sections are
also provided for each peripheral device that can be used in the system and includes
wiring setup, programming requirements, and a checkout procedure for that device.
The checkout procedures ensure that the specific device is operational in the system
before proceeding to the next section. This “sectional” arrangement is also particularly
useful if you are making an addition to the system at a later time (e.g., adding Wireless
zones, adding a 4285 Phone module, etc.).

Without an understanding of the programming method for this system, you will not be
able to successfully perform the required programming. Before any programming is
attempted, we therefore urge you to read the

“Mechanics of Programming” and the

“Data Field Descriptions” in the separate PROGRAMMING GUIDE that has been
supplied.

If you are an experienced user of Ademco products, you may choose to wire and then
program the entire system at one time. If so, refer to

“Mechanics of Programming”

and “Data Field Descriptions” in the separate PROGRAMMING GUIDE after the
hardware setup is complete. The separate PROGRAMMING GUIDE contains all of the
information you will need to program the system (including a blank Programming
Form), except for detailed programming for hardwired zones 1–6 and the wireless
zones, which are contained in the following sections in this manual:

B A S I C

HARDWIRED ZONES 1–6 and WIRELESS (RF) ZONE EXPANSION (5700 & 5800
RF SYSTEMS).

This manual uses various icons to denote critical notes and technical tips to assist you
with the installation of this system (see next page).

«
...
5
6
7
8
9
...
»

Содержание N7227V5

























































































Отзывы:

Нет отзывов

Похожие инструкции для N7227V5

SECURICAM Network DCS-900

Бренд: D-Link Страницы: 92

SECURICAM DCS-910

Бренд: D-Link Страницы: 7

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 4

Бренд: D-Link Страницы: 32

Бренд: D-Link Страницы: 8

Бренд: D-Link Страницы: 8

Бренд: D-Link Страницы: 110

Бренд: D-Link Страницы: 66

Бренд: D-Link Страницы: 9

Бренд: D-Link Страницы: 4

Бренд: D-Link Страницы: 6

Бренд: D-Link Страницы: 8

Security Camera

Бренд: Raritan Страницы: 2

Бренд: Data Harvest Страницы: 19

Security Camera

Бренд: TANDBERG Страницы: 247

Бренд: La Crosse Technology Страницы: 2

Bell & Gossett ecocirc XL Series

Бренд: Xylem Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды