3
FL-Cool-200629-Rev003-UM-en
- Do not press in the meat with your hands during processing.
- The protective covers must be attached when the meat mincer is turned off.
- ALWAYS unplug the power cord from the mains outlet before assembling or disassembling any
device parts.
- ALWAYS disconnect the device from the power supply before performing any maintenance work
on it.
- Use the meat mincer ONLY with properly fitted and fully functional protective covers. Do not use
the device if these conditions are not met.
- NEVER try to remove pieces of meat from the running meat mincer.
- The power cord must be replaced immediately once it is damaged, even slightly. It must be free
of cracks, damages, bulges, etc.
- NEVER pull on the power cord to unplug it from the mains outlet.
- If you hear any abnormal noises, immediately turn off the meat mincer.
Safe operation is no longer guaranteed:
- If the mains plug or the mains cable is visibly damaged.
- If the mains plug is no longer working.
- After prolonged storage in humid areas.
- If the thread of the worm housing and/or the drive pins of the worm show damage.
- If the keypad/on-off switch shows damage.
- If perforated discs thinner than 5 mm are used.
In these cases, contact your dealer or your service partner for your own safety.
Work area safety
- The work area where the meat mincer is used must be sufficiently lit and large enough to allow all
operations to be carried out smoothly and without risk to the user.
- The installation site must be FREE of any water, processing residues or other residual products.
The work surface must be kept in perfect condition, with any possible slipping, catching or
entanglement hazards being eliminated. The installation site must be kept free of any other loose
materials.
- ONLY the operator responsible for the meat processing must be present in the meat mincer work
area.
