Additel ADT286, Руководство пользователя

Страница: 81 / 129

80
type. Automatically configure the communication mode as network communication or serial
communication, and complete the configuration according to the specific information (IP address, port
number of network communication, or Baud rate, parity bit, data bit and stop bit for serial communication).
Click button to get the basic information of temperature source. Then click the button to connect
to the temperature source, and automatically return to the connected temperature source interface after
the connection is successful.

Edit: Click on the existing temperature source device in the list to edit its communication configuration and
establish a connection.

Delete: Click the button to check the temperature source device to be deleted, and then click the
button to complete the deletion. After the deletion is completed, it will return to the temperature control
source list interface. (Online devices cannot be checked and deleted)
2. Temperature Source Type Control
There are various temperature controller types preloaded and cannot be deleted. More types can be added by the