manualshive.com logo in svg

Adcon A850, Руководство пользователя

Поделиться
Скачать
Adcon A850 Скачать руководство пользователя страница 325

CHAPTER 6

The FOSS software packages installed on the gateway are:

325

 Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions 
are met: 

1. Redistributions of source code must retain the above copyright 
notice, this list of conditions and the following disclaimer.

 2. Redistributions in binary form must reproduce the above copy-
right notice, this list of conditions and the following disclaimer in 
the documentation and/or other materials provided with the distri-
bution.

 3. Neither the name of the University nor the names of its contrib-
utors may be used to endorse or promote products derived from 
this software without specific prior written permission. 

 THIS SOFTWARE IS PROVIDED BY CARNEGIE MELLON UNIVER-
SITY AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR 
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

 IN NO EVENT SHALL THE UNIVERSITY OR CONTRIBUTORS BE 
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY 
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED 
OF THE POSSIBILITY OF SUCH DAMAGE. 

The following license covers the files from Intel's "Highly Opti-
mized Mathematical Functions for Itanium" collection: 

Intel License Agreement 

Copyright (c) 2000, Intel Corporation 

All rights reserved.

Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions 
are met: 

Содержание A850















































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды