Adcon A850, Руководство пользователя

Страница: 260 / 366

CHAPTER 4
Using the Gateway
260
Data fetched from a file in CSV format (spreadsheet conversion for-
mat) on the local PC can be imported into several sensors working
as actuators. If one or more RTUs are selected to invoke the “Set
data” function, all sensors connected to these RTUs are used.
When importing sensor data from a file, the user has to enter the
following information about the file format:
• The column separator (“;” or “,” or space or tab),
• The decimal point character (“.” or “,”),
• The date format for the first column (“YYYY-MM-DD”,
“DD.MM.YYYY” or “MM/DD/YYYY”),
Note: If the actual file contains only two-digit years, the century
has to be set according to an epoch value of 70 (70..99
means 1970..1999, 0..69 means 2000..2069).
• The time format for the second column (“hh:mm:ss” or
“hh:mm:ss AM/PM”).
Configure
Figure 296. RTU Context Menu - RTU Data Management - Configure
“Configure” is used to send a “Refresh data” command to the
selected RTUs or selected sensors. After issuing the periodical
refresh data command (defined by the setting “Refresh interval”) in
the “Configuration update”, a table containing the refresh state of
all RTUs and sensors will monitored.