ADB DTC, Инструкция по эксплуатации

Страница: 12 / 41

AM.04.510e - Edition 1.5 12
Description
3 Description
3.1 Overview
You can find a complete overview of the fixture in all available versions in the chapter 7.
3.2 Intended use
The ADB taxiway inset light types DTS / DTC are intended for:
-
Centre line lights on straight and curved taxiway sections and on rapid exit taxiways
- Intermediate holding position lights
- De-/anti-icing facility exit lights
- Apron lead-in lights
- Runway guard lights where applicable
- Stop bar lights
- Only in special cases: on runways in low and medium intensity installations
DTS are intended for straight sections. DTC are intended for curved sections.
3.3 Monitoring (option)
The monitoring option is available. You can use the monitoring option with the Lamp Fault
Detection of Constant Current Regulators or with Individual Light Control and Monitoring
Systems (ILCMS) that check the status of the light by performing a continuity test on the
secondary of the ILCMS remote module. The monitoring option does a check on the light. In case
of a failure of the light, the failure is detected by the electronics embedded in the light.
3.4 Identification on the fixture
3.4.1 Top
- An embossing (A) 1 and 2 indicates side 1
and 2;
- Coloured dots (B) at delivery give an
indication of the colour of the light at that
side.
WARNING
Ask your local representative for the compatibility of the ILCMS system and
the light.
B
A