Adash 4300 VA3Pro Скачать руководство пользователя страница 38

Страница: 38 / 68

ADASH Ltd.

Adash 4300 – VA3Pro

For further technical and contact information visit www.adash.com, email: [email protected]

Channel, A channel number, B channel number

1, .., 3 Selection of the input signal source channel

Unit (name)

The selection of the required unit to be displayed.

Detect Type

RMS, Scaled 0-P, Scaled P-P, True 0-P, True P-P, AVG, Crest, Kurtosis

The detected value property ( P means Peak).
Scaled 0-P

it is equal 1.414 * RMS

True 0-P

it is true 0-peak value in the waveform (the highest value captured in time signal).

Scaled P-P

it is equal 2.828 * RMS

True P-P

it is true peak-peak value in the waveform (the difference between highest positive and highest

negative value in signal)

AVG

it is average value of all samples (total sum of absolute values divided by number of samples)

Crest

it is equal True 0-P/ RMS

Kurtosis

standard statistical formula for Kurtosis

Fmin [Hz] (value)

The low cut-off frequency of band pass filter, which is applied to the signal before further

processing (evaluation). The none value (available only when no integration is applied) means, that only input
DSP filter is applied (approximately 0.6 Hz).

Fmax [Hz] (value)

The high cut-off frequency of band pass filter, which is applied to the signal before

further processing (evaluation). The information about sampling frequency (fs=) is displayed under this item.

DEMOD fmin [Hz] (value)

The low cut-off frequency of band pass filter, which is applied to the signal

(removing low frequencies).

DEMOD fmax [Hz] (value)

The high cut-off frequency of band pass filter, which is applied to the signal

(removing high frequencies).

ACMT FS [Hz] (value)

The sampling frequency for ACMT evaluation. See the ACMT chapter for better

understanding.

Samples (value)

Number of samples (Speed control = off). The correspondent signal time length

is displayed under this item.

Lines (value)

Number of lines. The correspondent signal time length is displayed under this item.

Orders

(1/2,1-5), (1-5), (1/2,1-10), (1-10)

Averaging

linear, peak hold (for spectra)

linear, maximum, minimum, median (for static values)

Avg (value)

averaging number

How the averaging is used depends on the type of trigger:

freerun

when the measurement is started, the signal needed for averaging is taken continuously

external

when the external trigger comes, the signal needed for averaging is taken continuously

without waiting for next trigger

tacho

every signal for averaging is triggered (constant phase)

amplitude

every signal for averaging is triggered (constant phase)

Содержание 4300 VA3Pro





































































Результаты поиска

Содержание 4300 VA3Pro

Отзывы:

Похожие инструкции для 4300 VA3Pro

Бренды по названию

Популярные бренды

Adash 4300 VA3Pro, Руководство пользователя

Результаты поиска

Содержание 4300 VA3Pro

Отзывы:

Похожие инструкции для 4300 VA3Pro

Бренды по названию

Популярные бренды