manualshive.com logo in svg

Adaptec 2074700-R - ICP Vortex GDT8514RZ RAID Controller, Руководство пользователя

Adaptec 2074700-R - ICP Vortex GDT8514RZ RAID Controller - отличный выбор для расширения хранилища данных. Управляйте вашим хранилищем с легкостью, загружая бесплатное руководство пользователя с manualshive.com. Получите доступ к полной инструкции по настройке и использованию этого устройства.

Поделиться
Скачать
background image

90

Software Installation and User’s Guide

Installing Berkeley UNIX FreeBSD

9.4

ICP RAID Controller Installation in an Already 
Configured FreeBSD System

In the event you are adding an ICP RAID controller to a pre-existing FreeBSD system, 
ensure that the newly created host drives are detected after existing disks attached to the 
operating system (most particularly, the disk containing the root file system). Due to the 
device numbering in Unix-based kernels (in this case FreeBSD), failure to do so may 
render the system unbootable. Possible solutions to this issue may include one of the 
following procedures: 

1. Ensure that the ICP RAID driver loads after the other SCSI drivers have loaded. This 

can be accomplished by performing one of the following steps:

a. Compile the ICP RAID driver as a Kernel module and specify the load time in the /

boot/loader.rc configuration file

a. Manually load and unload the ICP RAID Kernel Module using utilities like "kldload" 

and "kldunload" after the system has booted.

2. Modify system configuration files like /etc/fstab. To do so you will need to know 

explicit device filenames associated with all the disks in the system.

The exact procedure used will depend on your particular system configuration. Please 
refer to your FreeBSD documentation before changing any system configuration.

9.4.1

Installation Procedure

1. Install the driver package.

a. Copy file 

iir-1.1.tgz

 from the driver floppy, for example, (DOS-Format):

mount -t msdos /dev/fd0 /mnt

cp /mnt/iir-1.1.tgz /tmp/iir-1.1.tgz

umount /mnt

b. Install package using the command:

pkg_add /tmp/iir-1.1.tgz

2. Reboot. From now on the driver is loaded automatically as a module. The OS version 

of ICPCON is also installed.

3. Run the ICPCON utility to configure your RAID devices (refer to 

Chapter 10, “ICP 

RAID Console,”

 for more details).

4. Follow the vendor supplied documentation to partition, format and mount your RAID 

host drives.

9.4.2

Un-installation Procedure

1. Unmount the host drive(s) using the following command: 

Содержание 2074700-R - ICP Vortex GDT8514RZ RAID Controller























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2074700-R - ICP Vortex GDT8514RZ RAID Controller

ABB ControlMaster CM15 Commissioning Instructions preview
ControlMaster CM15
Бренд: ABB Страницы: 28
Ickle Bubba Gravity Instructions For Use Manual preview
Gravity
Бренд: Ickle Bubba Страницы: 23
Danfoss VLT AQUA Drive FC 202 Installation Manual preview
VLT AQUA Drive FC 202
Бренд: Danfoss Страницы: 124
Danfoss AME 55 Installation Manual preview
AME 55
Бренд: Danfoss Страницы: 2
Danfoss AME 110 NL Datasheet preview
AME 110 NL
Бренд: Danfoss Страницы: 8
Danfoss AK-CH 650 User Manual preview
AK-CH 650
Бренд: Danfoss Страницы: 114
Danfoss ECL Comfort 300 Quick Manual preview
ECL Comfort 300
Бренд: Danfoss Страницы: 2
Danfoss TS715Si Installation Manual preview
TS715Si
Бренд: Danfoss Страницы: 16
Danfoss AME 438 SU Installation Manual preview
AME 438 SU
Бренд: Danfoss Страницы: 24
Danfoss AK-LM 330 User Manual preview
AK-LM 330
Бренд: Danfoss Страницы: 8
Danfoss ECL Comfort 296 Operating Manual preview
ECL Comfort 296
Бренд: Danfoss Страницы: 159
Danfoss VLT AutomationDrive FC 301 Operating Manual preview
VLT AutomationDrive FC 301
Бренд: Danfoss Страницы: 78
Danfoss AME 335 Installation Manual preview
AME 335
Бренд: Danfoss Страницы: 20
Danfoss ECL Comfort 210 User Manual preview
ECL Comfort 210
Бренд: Danfoss Страницы: 12
Danfoss ECL Comfort 110 Mounting Manual preview
ECL Comfort 110
Бренд: Danfoss Страницы: 8
Danfoss ECL Comfort 100M User'S Manual And Installation Instructions preview
ECL Comfort 100M
Бренд: Danfoss Страницы: 21
Danfoss AFQM Operating Manual preview
AFQM
Бренд: Danfoss Страницы: 16
Danfoss CCR2 Installation Manual preview
CCR2
Бренд: Danfoss Страницы: 64

Бренды по названию

Популярные бренды

Загрузить еще бренды