Adaptec 2074700-R - ICP Vortex GDT8514RZ RAID Controller Скачать руководство пользователя

Страница: 73 / 214

Software Installation and User’s Guide

Installing Novell NetWare

2. Change the path to A:\INSTALL and press <Enter> to continue.

3. Select

Storage RAID Controller Driver (SRCRX.HAM)

by setting the cursor on its

menu item and pressing the space bar (an X will appear in the item's check box).

4. Press <F10> to accept the selected item.

5. After the file copy is complete, select

Return to previous menu

to get back to the

INSTALL/NWCONFIG main options

6. Select

Driver Options

7. Select

Configure disk and storage device drivers

8. Select

Discover and load additional drivers

9. Press Enter to continue past any module load errors not related to the ICP RAID

controller.

10. Press <F3> to continue past any non-ICP RAID controller related hardware found by

NetWare for which a matching driver was not found.

11. NetWare will now load the SRCRX.HAM driver for each hardware instance you added

in the system and update the STARTUP.NCF file so the driver will load for each
subsequent restart of the server.

12. Select

Return to previous menu

twice to get back to the INSTALL/NWCONFIG main

options.

6.3.2

Installing the ICP RAID Controller Tools Kit Package

Note:

ICPCON.NLM will not find any controllers unless SRCRX.HAM is already loaded and
running.

1. Select

Product options

, then

Install a product not listed

2. Press F3 to change the path to A:\INSTALL and press <Enter> to continue.

3. Select

Storage RAID Controller Tools Kit (

ICPCON

.NLM)

by setting the cursor on its

menu item and pressing the space bar (an X will appear in the item's check box).

4. Press <F10> to accept the selected item.

NetWare will copy the necessary files, automatically load ICPCON.NLM, and modify
the AUTOEXEC.NCF file to load ICPCON.NLM for each subsequent restart of the
server.

5. Exit the Configuration Options tool.

6.3.2.1

Configuring Tools for Remote Access

1. Create a group SRC_Operator in the NDS.

2. Add the Admin and all other users who will use this interface.

3. Load SRCIPX.NLM.

Содержание 2074700-R - ICP Vortex GDT8514RZ RAID Controller























































































































































































































Результаты поиска

Содержание 2074700-R - ICP Vortex GDT8514RZ RAID Controller

Отзывы:

Похожие инструкции для 2074700-R - ICP Vortex GDT8514RZ RAID Controller

Бренды по названию

Популярные бренды

Adaptec 2074700-R - ICP Vortex GDT8514RZ RAID Controller, Руководство пользователя

Результаты поиска

Содержание 2074700-R - ICP Vortex GDT8514RZ RAID Controller

Отзывы:

Похожие инструкции для 2074700-R - ICP Vortex GDT8514RZ RAID Controller

Бренды по названию

Популярные бренды