Adaptec 2074700-R - ICP Vortex GDT8514RZ RAID Controller, Руководство пользователя

Страница: 65 / 214

Software Installation and User’s Guide 65
Installing Linux
5.5.2 Further Driver Parameters
•
The driver parameters reserve_mode and rescan:N require ICP RAID controllers with
firmware version FW x.23.00 or higher.
•
The current default settings of the driver are:
‘gdth=disable:N,reserve_mode:1,reverse_scan:N,max_ids:127,rescan:N’
•
If gdth is loaded as a module, these parameters can also be added with a special syntax.
•
IRQ parameters are entered as ‘IRQ=’ (for example, IRQ=10). Several parameters are
not separated with a comma (‘,’) but a space (‘ ‘). All ‘:’ are substituted with ‘=’, all ‘Y’
with ‘1’ and all ‘N’ with ‘0’.
•
Default: ‘modprobe gdth disable=0 reserve_mode=1 reverse_scan=0 max_ids=127
rescan=0’
5.6 Installation of ICPCON Monitoring Utility
5.6.1 Installation of ICPCON from the RAID Software Suite CD-ROM
1. If you are installing the ICPCON from the RAID Software Suite CD-ROM, then place
the RAID Software Suite CD-ROM in the CD-ROM drive and mount the CD-ROM:
$ mount /dev/cdrom /mnt/cdrom
2. Copy the ICPCON utility archive to /usr/sbin. Note that x.xx in these examples is the
version of ICPCON that was shipped on your software CD that matches the current
Firmware.
$ cp /mnt/cdrom/linux/install/storcon-2.02.gz /usr/sbin/storcon-x.xx
disable:Y deactivates the RAID driver
disable:N activates the RAID driver
reserve_mode:0 reserves no SCSI devices [*1]
reserve_mode:1 reserves all not-initialized removable hard disk [*1]
reserve_mode:2 reserves all not-initialized SCSI devices [*1]
reserve_list:h,b,t,l,h,b,t,l,... reserves SCSI devices at the corresponding coordinates with
h=Hostadapter, b=SCSI Bus, t=Target ID, l=LUN
reverse_scan:Y reversed scanning order of the PCI controllers
reverse_scan:N Normal scanning order of PCI controllers according to the
system BIOS
max_ids:x x = number of target IDs per SCSI channel (accelerates the
boot process)
rescan:Y rescan all SCSI channels / Ids
rescan:N scan only those SCSI devices found during system power up
[*1]