Adam Equipment ACBplus Series, Руководство по обслуживанию

Страница: 20 / 30

@Adam Equipment Company 2005 18
11.0 COMMUNICATION WITH A COMPUTER/PRINTER
The ACB
plus
series of scales come with a standard RS-232 interface.
The standard Interface parameters are: Connection details are:
Data Format for normal weighing operations, parts counting or recalling
of totals from memory will all be different.
Normal Output:
G S _ X X X
.
X X u u u
Input commands format
:
The scale can be controlled with the following commands. The commands must be
sent in upper case letters, i.e. “ T ” not “ t ”.
T<cr><lf> Tares the scale to display the net weight. This is the same as pressing
[Tare]
key.
Z<cr><If> Sets the zero point for all subsequent weighing. Display shows zero.
T5.345<cr><if> Would be same as entering a preset tare value of 5.345 from keypad
P<cr><lf> Prints the results to a PC or printer using the optional RS-232
interface. It also adds the value to the accumulation memory if the
accumulation function is not set to automatic.
GS 123.45g GS for Gross Weight, NT for Net Weight and u for unit of weight
No. 1 This number increments every time a new value is stored in memory
Total 123.45g The total value stored in memory
<lf> Includes 2 line feeds
<lf>
RS-232 output of weighing data
ASCII code
4800 Baud
8 data bits
No Parity
Connector: 9 pin d-subminiature
socket
Pin 3 Output
Pin 2 Input
Pin 5 Signal Ground