Adam Equipment ACBplus Series, Руководство по обслуживанию

Страница: 7 / 30

@Adam Equipment Company 2005 5
4.0 OPERATION
4.1 ZEROING THE DISPLAY
•
Press the [Zero] key when the platform is empty.
•
[Zero] key may be pressed at any time to set the zero point from which
all other weighing and counting is measured.
•
When the zero point is obtained the “
O
” indicator will be on in the left
bottom corner of the LCD.
•
The scale has an automatic re-zeroing function to account for minor
drifting or accumulation of material on the platform. However you may
need to press the [Zero] key to re-zero the scale if small amounts of
weight are shown when the platform is empty.
4.2 TARING
•
Zero the scale by pressing the [Zero] key, if necessary.
•
The “ O ” indicator will be on.
•
Place a container on the platform, a value for its weight will be
displayed.
•
Press the
[Tare]
key to tare the scale. The weight that was displayed is
stored as the tare value. It is subtracted from the displayed value,
leaving zero on the display. The NET symbol will be on at the right top
corner to indicate that the weight displayed is the net weight.
•
As the product is added, only the net weight will be shown.
•
The scale could be tared a second time if another type of product was
to be added to the first one. Again only the weight that is added after
taring will be displayed.
•
When the container is removed a negative value will be shown. If the
scale was tared just before removing the container, this value is the
gross weight of the container plus all products those were removed.
•
The “ O ” indicator will also be on because the platform is back to the
same condition as it was when the [Zero] key was last pressed.
•
To cancel the tare value, press [Tare] again.