Adam Equipment ABK 120, Руководство пользователя

Страница: 24 / 48

23
| P a g e © Adam Equipment Company 2011
7.0 USER PARAMETERS
Pressing the [Func/C] key during normal operation allows the user to access
the parameters for customizing the scale. The parameters are split into 4
groups-
1. Check weighing parameters,
2. Percent and Animal Weighing Functions
3. RS-232 parameters and
4. Scale parameters
•
When [Func/C] is pressed, display will first show “
FunC 1
” for Check
weighing parameters.
•
Press either the [Func/C] key or the [Pcs/ ] to advance through the
groups “
FunC 1
”, “
FunC 2
” , “
FunC 3
” and “
FunC 4
”. Press [Z/T] to enter the
desired group of parameters.
•
When in one of the sections press [Print/M+/Esc] to return to the group
“
FunC 1
”. If you press [Print/M+/Esc] again, the scale will exit the User
Parameter section and return to normal weighing.
7.1
CHECK WEIGHING PARAMETERS
•
Press [Z/T] to enter the group.
•
Use the [Unit/  ] key and [Pcs/ ] key to set the values or just the
[Pcs/ ] key to select the options.
•
Press [Z/T] to confirm the change and then advance to the next
parameter by pressing the [Pcs/ ] key.
This group of parameters-
- Set low and high limits for check-weighing
- Enables or disables the check weighing alarm
- Enables or disables the negative check weighing