Each time you press the switch up or
down, the vehicle speed is increased or
decreased by about 1 mph (1 km/h). If
you keep the switch pressed up or
down, the vehicle speed increases or
decreases by 5 mph or 5 km/h until
you release it.
n
Adjusting the Vehicle Distance
Press the Interval button to change the
following interval. Each time you press
the button, the setting cycles through
extra long, long, middle, and short.
n
During Operation
If a vehicle is detected ahead of you
when ACC with Low Speed Follow is
turned on, the system maintains,
accelerates, or decelerates your
vehicle’s set speed to keep the
vehicle’s set following interval from
the vehicle ahead.
If a vehicle detected ahead of you
slows down abruptly, or if another
vehicle cuts in front of you, a beep
sounds and BRAKE appears on the
multi-information display to alert you .
ACC with Low Speed Follow has limited braking capability and may not
stop your vehicle in time to avoid a collision with a vehicle that quickly
stops in front of you.
Always be prepared to apply the brake pedal when conditions require.
DRIVING
126 |
n
Canceling ACC with Low Speed Follow
You can press the CANCEL button,
MAIN button, or the brake pedal. The
ACC with Low Speed Follow indicator
goes off.
Certain conditions may cause ACC to
cancel automatically. When this
happens, a beep sounds and a message
appears on the multi-information
display.
Improper use of ACC with Low Speed Follow can lead to a crash.
Use ACC with Low Speed Follow only when traveling on open highways in
good weather.
n
Switching to Standard Cruise Control
Press and hold the Interval button for one second.
Cruise Mode Selected appears in the
multi-information display for two
seconds, and then the mode switches
to Cruise.
Press and hold the interval button
again to switch back to ACC with Low
Speed Follow. ACC Mode Selected
appears on the multi-information
display for two seconds.
DRIVING
| 127
