n
Parking Brake
Keep the vehicle from moving when parked.
To apply:
1. Press the
parking brake
switch.
To release:
1. Depress the
brake pedal.
2. Pull the parking
brake switch
up.
The vehicle can roll away if left unattended without confirming that Park
is engaged.
A vehicle that rolls away could cause a crash resulting in serious injury or
death.
Always keep your foot on the brake pedal until you have confirmed that P
is shown on the gear position Indicator.
n
Automatic Brake Hold
Keeps the brake applied after releasing the brake pedal until the
accelerator pedal is pressed. You can use this system while the vehicle is
temporarily stopped, like at traffic lights and in heavy traffic.
DRIVING
120 |
n
Brake Assist System
During hard or emergency braking, the system increases braking force. The
brake pedal may move slightly or make a noise; this is normal. Continue to
hold the brake pedal firmly down.
n
Anti-Lock Brake System (ABS)
During hard or emergency braking, the system rapidly pumps the brakes to
prevent wheel lockup and help you maintain steering control. Do not
pump the brake pedal, rather continue to hold it firmly down.
The electronic brake distribution (EBD) system, which is part of the ABS,
also balances the front-to-rear braking distribution according to vehicle
loading.
When ABS activates, you may notice vibrations through the brake pedal or
the vehicle body, the brake pedal depressing further than usual, or hear a
motor noise from the engine compartment. These are all normal.
The ABS may not function correctly if you use an incorrect tire type and
size.
DRIVING
| 121
