n
Storing a Position in Memory
1. Adjust the seat, mirrors, and the
steering wheel to your preferred
positions.
2. Press SET.
3. Press and hold memory button 1 or
2 within 5 seconds of pressing the
SET button.
You will hear two beeps when the
memory is set.
4. Press one of the memory buttons
to recall previously stored
positions.
Adjusting the Head Restraints
Your vehicle is equipped with head
restraints in all seating positions. Head
restraints are most effective for protection
against whiplash and other rear-impact
crash injuries when the center of the back
of the occupant's head rests against the
center of the restraint. The tops of the
occupant's ears should be level with the
center height of the restraint.
For a head restraint system to work properly:
• Do not hang any items on the head restraints or from the restraint legs.
• Do not place any objects between an occupant and the seat-back.
• Install each restraint in its proper location.
Improperly positioning head restraints reduces their effectiveness and
increases the likelihood of serious injury in a crash.
Make sure head restraints are in place and positioned properly before driving.
VEHICLE CONTROLS
54 |
n
Adjusting the Front Head Restraints
To raise:
Pull it upward.
To lower:
Push it down while pressing the release button.
n
Adjusting the Rear Head Restraints
To raise:
Pull it upward.
To lower:
Push it down while pressing the release button.
VEHICLE CONTROLS
| 55
