![Acura MDX 2020 Скачать руководство пользователя страница 91](http://html1.mh-extra.com/html/acura/mdx-2020/mdx-2020_owners-manual-for-quick-reference_2844839091.webp)
WARNING: Battery posts, terminals, and related accessories contain lead and
lead compounds. Wash your hands after handling.
Models with Auto Idle Stop: The battery installed in this vehicle is specifically
designed for a model with Auto Idle Stop. Using a battery other than this
specified type may shorten the battery life, and prevent Auto Idle Stop from
activating. If you need to replace the battery, make sure to select the specified
type. Ask a dealer for more details.
Window Washer Fluid
Check the amount of window washer fluid by looking at the reservoir. Fill the
reservoir if it is low. Pour the washer fluid carefully. Do not overflow the
reservoir.
Do not use engine antifreeze or a vinegar/water solution in the windshield
washer reservoir. Antifreeze can damage your vehicle’s paint. A vinegar/water
solution can damage the windshield washer pump.
Use only commercially available windshield washer fluid.
Avoid prolonged use of hard water to prevent lime scale build up.
Brake Fluid
The fluid level should be between the MIN and MAX marks on the side of the
tank. We recommend using Acura Heavy Duty Brake Fluid DOT 3.
Pour the fluid carefully.
If the fluid level is at or below the MIN
mark, have a dealer inspect for leaks or
worn brake pads as soon as possible.
Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system
and can cause extensive damage.
If the specified brake fluid is not available, you should use only DOT 3 or DOT
4 fluid from a sealed container as a temporary replacement.
MAINTENANCE
174 |
Using any non-Acura brake fluid can cause corrosion and decrease the
longevity of the system. Have the brake system flushed and refilled with Acura
Heavy Duty Brake Fluid DOT 3 as soon as possible.
If the brake fluid level is at or below the MIN mark, have a dealer inspect the
vehicle for leaks or worn brake pads as soon as possible.
Changing Wiper Blades
If the wiper blade rubber has deteriorated, it will leave streaks and the hard
surfaces of the blade may scratch the window glass.
1. Lift the driver side wiper arm first, then
the passenger side.
2. Pry on the edge of the lock tab using a
flat-tip screwdriver to push it up. Wrap
the flat-tip screwdriver with a cloth to
prevent scratches.
3. Slide the holder off the wiper arm.
MAINTENANCE
| 175