ActronAir CRQ2-14AS, Руководство по установке и пусконаладке

Страница: 20 / 36

Installation & Commissioning Guide - ESP Platinum OD Split Ducted Units
Doc. Part No. 0525-053 Ver. 5 200129 Page 20 of 36
AEDC2 DATA CABLE P-CLIP SHIELDING INSTRUCTIONS
Step 1: Step 1:
• • Strip approximately 100mm of outer insulation off Strip approximately 100mm of outer insulation off
AEDC2 Data cable. AEDC2 Data cable.
• • Unwrap the shield foil and plastic wrap around the Unwrap the shield foil and plastic wrap around the
core wires, (See Fig. 1 below). core wires, (See Fig. 1 below).
Step 2: Step 2:
• • Twist the core wires together. Twist the core wires together.
• • Remove (cut) the plastic wrap and screen Remove (cut) the plastic wrap and screen
wires, (See Fig. 2 below). wires, (See Fig. 2 below).
Step 3: Step 3:
• • Wrap shield foil around core wires as shown in Wrap shield foil around core wires as shown in
Fig. 3 below. Fig. 3 below.
Step 4: Step 4:
• • Remove metal P-Clip from the electrical panel. Remove metal P-Clip from the electrical panel.
• • Open up P-Clip to fit AEDC2 data cable into Open up P-Clip to fit AEDC2 data cable into
clip. (See Fig. 4 below). clip. (See Fig. 4 below).
Figure 1
Screen Wires
Outer Insulation
Plastic Wrap
Shield Foil
Core Wires
Figure 2
Figure 3
P-Clip
Figure 4