Actelis ML600 Скачать руководство пользователя страница 3

 

Patents

 

The products described in this document are protected by U.S. Patent No. 6,744,811 and other U.S. 
patents, foreign patents, and/or pending applications. 

Document Feedback

 

We welcome your comments and suggestions about this document. Please mail them to Technical 
Publications, Actelis Networks, 6150 Stevenson Boulevard, Fremont, CA 94538 or mail to: 
[email protected]. Include the document number, revision number and title of this document in your 
correspondence. Please include your name and phone number if you are willing to provide additional 
clarification. 

 

Document Identification

 

ML600 Release 5.00 Quick Installation Guide 
Revision - A01 
Date: May 2006 

 

ML600 Series FCC Compliance

 

The ML600 series complies with the limits for a Class B digital device, pursuant to part 15 of the FCC 
rules. These limits are designed to provide reasonable protection against harmful interference when the 
equipment is operated in a residential environment notwithstanding use in commercial, business and 
industrial environments. This equipment generates, uses, and can radiate radio-frequency energy and, if 
not installed and used in accordance with the Quick Installation Guide, may cause harmful interference to 
radio communications. 

The authority to operate this equipment is conditioned by the requirement that no modifications will be 
made to the equipment unless the changes or modifications are expressly approved by Actelis Networks, 
Inc. 

 

Canadian Emissions Requirements

 

The ML600 Class B digital apparatus meets all requirements of the Canadian Interference-Causing 
Equipment Regulations. 

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel 
brouilleur du Canada. 

 

 General Safety Summary 

1. Read and follow all warning notices and instructions marked on this product or included in this manual. 

2. All installation, repair or replacement procedures must be performed by qualified service personnel. 

3. Before attempting to operate or repair this product, make sure product is properly grounded. 

  

 

 

ML600 Release 5.0

a

 Quick Installation Guide    iii 

Содержание ML600


























Отзывы: