
Installing the System
Installation Overview
Horizontal Surface Mounting
Place the ML600 on a table or other horizontal surface. The ML600 comes with rubber feet in
the accessory kit that can be used to help keep the ML600 from sliding on the surface or
scratching it.
Figure 4: Attaching the rubber feet
Attach the rubber feet to the four corners on the bottom of the unit within the indented circles.
Use a sturdy surface in an uncluttered area.
Note: You may want to secure the networking cables and ML600 power cord to the table leg
or other part of the surface structure to help prevent tripping over the cords.
!
Caution:
Make sure the air flow is not restricted around the front and rear of the
ML600.
10 ML600 Release 5.0
a
Quick Installation Guide