Actelis ML600 Скачать руководство пользователя страница 2

 

Copyright © 2006 Actelis Networks, Inc. All Rights Reserved. All specifications are subject to change 
without notice. Printed in U.S.A. 

 

Notice 

 

This publication is protected by International copyright law. No part of this publication may be copied or 
distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer 
language in any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or 
disclosed to third parties without the express written permission of Actelis Networks, Inc., 6150 Stevenson 
Boulevard, Fremont, CA 94538. 

Disclaimer of Warranties and limitation of Liabilities

 

Actelis Networks, Inc. (hereafter referred to as Actelis Networks, Inc. or Actelis Networks), makes no 
representation or warranties with respect to the contents hereof and specifically disclaims any implied 
warranties of merchantability or fitness for a particular purpose. Further, in no event, shall Actelis 
Networks be liable for incidental or consequential damages in connection with or arising from the use of 
the ML 600 series, cards and modules, accessories kits, this manual or any related materials. 

Actelis Networks reserves the right to revise this publication from time to time and to make changes in the 
content hereof without obligation to notify any person of such revisions or changes. 

Warranty, Sales, Service and Training Information

 

Please contact your local sales representative, service representative or distributor directly for any help 
needed. For additional information concerning warranty, sales, service, repair, installation, documentation, 
training or distributor locations, use one of the following: 

 

Internet:

 Visit the Actelis Networks World Wide 

World Wide Web site at

 http://www.actelis.com: 

 

Email

:  [email protected] 

for technical support. 

 

Customer support:

 Contact Actelis Networks Customer Support directly at one of the following 

numbers: 

 

Belgium:       (0) 800 71180 

 

Denmark:           80 887 771 

 

France:         (0) 800 918 450 

 

Germany:     (0) 800 1833504 

 

Netherlands: (0) 800 0225982 

 

UK:              (0) 800 9179049 

 

USA:           +1 866 638 2544 or +1 510 545 1071 

For all other inquiries, please call +1 866 ACTELIS (+1 866 228 3547) or +1 510 545 1071. 

Trademarks

 

Actelis, Actelis Networks, EFM

plus

, Carrier Ethernet over Copper and related logos and icons are the 

registered trademarks or copyrights of Actelis Networks. Other identifiers may be trademarks or marks of 
their respective owners. 

ii     ML600 Release 5.0

a

 Quick Installation Guide     

Содержание ML600


























Отзывы: