Acromag AXM-A75 страница 5 Скачать руководство пользователя | Manualshive

Страница: 5 / 35

background image

AXM-

A75 User’s Manual

Multifunction I/O Mezzanine Board

_____________________________________________________________________________________

- 4 -

The information contained in this manual is subject to change without notice. Acromag, Inc. makes no
warranty of any kind with regard to this material, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Further, Acromag, Inc. assumes no responsibility
for any errors that may appear in this manual and makes no commitment to update, or keep current,
the information contained in this manual. No part of this manual may be copied or reproduced in any
form, without the prior written consent of Acromag, Inc.

IMPORTANT SAFETY CONSIDERATIONS

It is very important for the user to consider the possible adverse effects of power, wiring, component,
sensor, or software failures in designing any type of control or monitoring system.  This is especially
important where economic property loss or human life is involved.  It is important that the user
employ satisfactory overall system design.  It is agreed between the Buyer and Acromag, that this is
the Buyer's responsibility.

WARNING: The AXM-

A75 length dimension exceeds the “CMC I/O envelope” as

shown in

IEEE 1386-2001 Figure 4.1 and Figure 4.2 by 7.5mm (limited to 31mm) and is not compatible
with all PMC/XMC carriers. The AXM-A75 when plugged into a compatible Acromag
PMC/XMC module will work in most air-cooled Acromag non-processor carriers including the
AcPC46xx, APC-PMC, APCe867x, & VPX482x models. It is not compatible with the VPX481x
series or any Acromag processor board that has a PMC/XMC slot. Contact the factory with
any questions.

«
...
3
4
5
6
7
...
»

Содержание AXM-A75




































Отзывы:

Нет отзывов

Похожие инструкции для AXM-A75

Бренд: Waterway Страницы: 16

Бренд: Daikin Страницы: 5

Бренд: Daikin Страницы: 38

Бренд: Daikin Страницы: 2

Бренд: Daikin Страницы: 148

Бренд: Daktronics Страницы: 52

Бренд: Waeco Страницы: 20

Бренд: Z-Wave Страницы: 56

Бренд: Galaxy Control Systems Страницы: 5

Бренд: Oldham Страницы: 32

Бренд: H3C Страницы: 14

Compact Comfort VAV12

Бренд: SAI HVAC Страницы: 16

Бренд: saia-burgess Страницы: 203

Бренд: Sailor Страницы: 1

Cutler-Hammer Jockey

Бренд: Eaton Страницы: 12

Бренд: WAGO Страницы: 16

Бренд: ICP DAS USA Страницы: 7

Бренд: Estun Страницы: 41

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды