ACP OMNISTIM 500A Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 62

ACP OMNISTIM 500A Скачать руководство пользователя страница 48

48 OMNISTIM

®

500A USER MANUAL

COPYRIGHT 2001 - 2007, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED

CONFIDENTIAL AND PROPRIETARY

LIMITED PRODUCT WARRANTY

Warranty Coverage

Accelerated Care Plus Corp., (ACP) warranty extends to any owner of the product during the warranty period for
that product. Only those items returned to the ACP Service Center within the warranty period, and also within 30
days after notification to ACP of the defect, shall be eligible for repair under the product warranty. ACP may, at its
discretion, repair or replace any part(s) that prove to be defective during the warranty period

.

Warranty Exclusion

Any and all warranty coverage will be void if any of the following have occurred:

1.

The product contains repairs or replacement parts not furnished by ACP.

2.

The product is damaged resulting from misuse or negligence.

3.

The product has been tampered with and/or altered, including serial number alteration.

Warranty Period

New Equipment

New ACP equipment is warranted against defects in material and workmanship for a period of two (2) years from
the date of purchase.

Refurbished Equipment

Equipment purchased specifically labeled as Refurbished equipment, is warranted against defects in material and
workmanship for a period of one (1) year from the date of purchase.

Accessories

All accessories for ACP equipment are warranted against defects in material and workmanship for a period of ninety
(90) days from the date of purchase.

Ultrasound transducers are warranted against defects in material and workmanship for a period of one (1) year from
the date of purchase.

Crystals for ultrasound transducers have a lifetime warranty against defects in material and workmanship.

Warranty Validation

A copy of the ACP or Recognized Dealer invoice is required to verify and approve warranty coverage.

The following information needs to be provided to the ACP Customer Service Representative prior to the product
being returned under warranty coverage:

Customer Name or Account Number as it appears under the “Bill To” on the ACP or Recognized ACP
Dealer invoice.

Invoice Date and Number

Model number, description, and serial number of equipment

Detailed description of the problem and/or issue

«
...
46
47
48
49
50
...
»

Содержание OMNISTIM 500A































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды