ACP ARX1, Руководство по обслуживанию

Страница: 32 / 80

©2018 ACP, Inc.
Cedar Rapids, IA 52404 Page 32 of 80
Part No. 16400033
Original Instructions
User Options
There are several options you can change to customize the operation of the
oven for your business The table on the following page shows these options
The factory setting is shown in bold type.
Access and Modify User Options:
1 Press the Blue Menu Icon at the bottom of the screen
2 Scroll down and press to select User Options
.
3 Use this Menu to modify Oven Settings
4 Press the Left Arrow Icon to return to the Menu after making each change
Note:
You may also make User Options changes using the ACP
Programming Application.
Note:
Programming the Preheat Temperature in the User Options
Menu will set the oven to heat to a certain temperature each time it is
powered on.
ALLOW MANUAL COOK
Allow Manual Cook option must be enabled to view Allow Manual Save options
CLEAN FILTER REMINDER
When “Clean Filter” message displays, clean air filters thoroughly.
Cleaning the air filters will not shut off message.
Message will automatically stop displaying after 24 hours
a Check “Filter Cleaned” box to confirm clean.
b Select “Dismiss” to close popup
Note: If “Filter Cleaned” box is checked, reminder time resets.
Necessary cleaning frequency of air filters dependant on microwave use and
environmental conditions Once frequency is determined, set the user option for
appropriate time frame
Air filters and vents must be cleaned regularly to prevent overheating of oven.
Refer to “1 Clean Air Filters” on page 30 for cleaning instructions
PIN CODE
If enabling PIN Code, select a 4-digit numeric PIN PIN Code must be enabled
before trained technician may enter
Service Mode.
PREHEAT WARNING
To guarantee that oven reaches the desired temperature before the start of cook
cycle, enable Preheat Warning in user options Enable setting when using recipe
with different starting temperature than default Preheat Temperature
TIME AND DATE
This oven maintains a data log of information, including date and time of operation
This information is used to diagnose and troubleshoot errors An accurate date and
time are important for the data log
1 Select
Time
Choose format ( 12 HR or 24 HR ) Enter local time
2 Press the Left Arrow Icon to return
3 Select
Date Choose format (
MM/DD/YYYY or DD/MM/YYYY
)
Enter today’s date
4 Press the Left Arrow Icon to return
2