ACL Staticide ACL-750-USB Combo Tester Instructions
2/8/2021
64
2.
Place the server name in the NET TIME line:
NET TIME \\XYZ /SET /YES *XYZ is the server name
3.
Save the file
4.
Right click on the Synch.bat file , click Properties, and select Close On Exit.
5.
If the SYNCH.BAT file already exists in the directory, but the program leaves a small ‘Finished’ box on the toolbar when it is
called, click the Properties box on the Synch.bat file item in Explorer and click the ‘Close on Exit’ box.
6.
The SYNCH.BAT file is included in the installation disk. If no network is used or the time synchronization is not desired, delete
or rename the SYNCH.BAT file.
EsdTest File Administration
1.
Install and configure the computer hardware (see above)
2.
Set up the network. Make sure the test stations and their files are visible on Windows Explorer.
3.
If polling the station data bases then put the test station computer names into the NetList.txt file. If running from one master
data base, then set up the test station “Setup Directories Window” to point to the server data directory.
4.
Set up the server AutoGenerate email task scheduler to poll the stations for data and send reports
5.
The supervisor checks his emailed exception report to see if any employees have failed or did not test.
6.
The supervisor can modify the sick leave/vacation status, generate monthly reports, delete any employees that are no longer
working at the firm, and can reset the log.txt file to create a back up.
7.
To access the master file from a remote manager’s computer, set up the “Setup Directories Window” to point to the server data
directory.
www.
.com
1.800.561.8187
