Chapter 1
23
Item (NB Cont.)
Features
•
The RS880M complies with all relevant Windows Logo Program
(WLP) requirements from Microsoft for WHQL certification.
Test Capability Features
The RS880M has a variety of test modes and capabilities that provide a
very high fault coverage and low DPM (Defect Per Million) ratio:
•
Full scan implementation on the digital core logic through ATPG
(Automatic Test Pattern Generation Vectors).
•
Dedicated test logic for the on-chip custom memory macros to
provide complete coverage on these modules.
•
A JTAG test mode to allow board level testing of neighboring
devices.
•
An EXOR tree test mode on all the digital USB's to allow for proper
soldering verification at the board level.
•
A VOH/VOL test mode on all digital USB¡¦s to allow for proper
verification of output high and output low values at the board level.
•
Access to the analog modules to allow full evaluation and
characterization.
•
IDDQ mode support to allow chip evaluation through current leakage
measurements.
•
These test modes can be accessed through the settings on the
instruction register of the JTAG circuitry.
•
Additional Features
•
Integrated spread spectrum PLLs on the memory and LVDS
interface.
Содержание ASPIRE 553G
