Chapter 2
31
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
NOTE:
The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in
boldface
are the default and suggested
parameter settings.
Parameter
Description
Format/Option
System Time
Sets the system time. The hours are displayed with 24-
hour format.
Format: HH:MM:SS
(hour:minute:second)
System Date
Sets the system date.
Format MM/DD/YYYY
(month/day/year)
Total Memory
This field reports the total memory size. Memory size is
fixed to 3071 MB.
N/A
Video Memory
This field reports the video Memory size.
N/A
Quick Boot
Enables the boot sequence to skip some processes to
boot up more quickly.
Option:
Enabled
or
Disabled
Network Boot
Enables, disables the system boot from LAN (remote
server).
Option:
Enabled
or
Disabled
F12 Boot Menu
Enables or disables the
Press <F12> to display boot
menu
message during startup.
Option: Enabled or
Disabled
D2D Recovery
Enables, disables D2D Recovery function. The function
allows the user to create a hidden partition on hard disc
drive to store operation system and restore the system
to factory defaults.
Option:
Enabled
or
Disabled
SATA Mode
Control the mode in which the SATA controller should
operate.
Option:
ACHI
or IDE
InsydeH20 Setup Utility
Rev 3.5
Information
Main
Advanced
Security
Power
Boot
Exit
Item Specific Help
System Time
[13:
04:04]
System Date
[10/10/2008]
This is the help for the
hour field. Valid range
Total Memory
3071 MB
is from 0 to 23.
Video Memory
[64MB]
INCREASE/REDUCE : F5/F6
Quick Boot
[Enabled]
Network Boot
[Enabled]
F12 Boot Menu
[Disabled]
D2D Recovery
[Enabled]
SATA Mode
[ACHI]
F1
Help
↑↓
Select Item
F5/F6
Change Values
F9
Setup Default
ESC
Exit
←→
Select Menu
Enter
Select
X
Submenu
F10
Save and Exit
Содержание Aspire 4935 Series
