Accurate Technology Model 9, Руководство по установке

Страница: 56 / 132

OPERATION
Direct Channel Selection >
This method of source selection takes advantage of the Channel List feature explained in
section 3.7,
Utility Features. The Channel List allows you to assign a source to a 2-digit
number, from 01 to 99.
Once you have assigned channel numbers to your sources, and the projector is at
presentation level, you can select a source by pressing the 2-digit
channel number
associated with it.
To select a channel, press "m" "n". Where: m = the 1st digit of the channel
number n = the 2nd digit of the channel number
The projector switches to, and, displays,
the source assigned to the channel number. If an
invalid switcher or slot number is assigned to the channel, a warning message is
displayed.
Example
Channel 08 in the Channel List was programmed to select a source connected to slot 5 on
switcher 3. To select this source, simply press
0 then 8.
Note: If the Channel Select option in the Preferences menu ( UTIL 5 then 4 ) is set
to either ''1 digit only '' or *1 or 2 Digits'' the preceding zero shown in the example above
does not have to be entered. For more information, refer to the Preferences entry in
Section 3.7.
Up/Down Channel Selection >
This method of source selection also takes advantage of the Channel List feature. It lets
you quickly switch between channels programmed in the Channel List by using the up
and down arrow keys on the keypad.
To make a selection: Press SOURCE followed by UP or DOWN.
Each time an arrow key is pressed, a channel number (and name) is displayed on the
screen. When the channel number you want is displayed, simply wait to allow the
projector to switch to the source defined by the channel.
Notes: 1) If a channel specifies a switcher which does not exist, the channel is considered
invalid. 2) The Channel List utility allows you to (lag the channels to be used by the
Up/Down Channel selection feature. For more information, refer to the Channel List
entry in section 3.7, Utility Features.
The Source Message >
When SOURCE or RECALL is pressed at presentation
level, and/or a source switch is made, a source message is briefly overlayed on the
projection screen. The source message displays current source information.
3-12