Accumet XL 20, Руководство пользователя

Страница: 24 / 199

13
Getting Started:
Conductivity Cells
XL20, 30, 50 and 60 meters
The XL series meter – XL20, XL30, XL50 and XL60 - allows you to use two types of conductivity
cells: the 2-cell conductivity cell and the 4-cell conductivity cell with DIN connector. Only one type
of conductivity cell can be connected at a time.
1. Carefully remove the protective cover from the end of
the conductivity cell. Before using your conductivity cell,
soak it for 5 to 10 minutes in distilled or deionized water.
2. Connect the 2-cell or 4-cell conductivity cell to the
conductivity cell jack. The 2-cell and 4-cell accumet
conductivity cells have built in ATC probes. Therefore,
there is no need to connect a separate ATC probe.
3. Rinse and blot-dry (don't wipe) probe between each measurement. Rinse probe with
distilled or deionized water, or a portion of the next solution to be measured.
4. Between measurements, conductivity probes can be stored dry.