61
Acuvim-L
The 17
th
screen: PROFIBUS address setting page.
PROFIBUS address can be set from 0~126, this
page will display if the power meter connect a
PROFIBUS module.
PROFIBUS address can be set only via key, and it
valid right now after modified.
Only Acuvim-DL/EL display the page.
3.6 Ethernet Network Module Settings
For Acuvim-DL and EL,under any set of system parameters mode page, press
the "H" and "P" key to enter the Network Settings page.Ethernet parameter
setting mode key operation is the same as to system parameter setting mode
key operation. Parameters have been set, simultaneously press the "P" key and
the "H" key to exit the Ethernet parameter setting mode to return to the system
parameter setting mode.
The 1
st
screen: Displays the DHCP flag settings
page. When set to 0, the static IP; set to 1, the
dynamic IP.
Fig.3-72 PROFIBUS address setting
ALUM0366
Fig.3-73 PROFIBUS address setting
ALUM0365
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.com