34
Acuvim-L
3.2 Metering Data
Acuvim-L series meter displays the voltage metering screen (default screen)
when first powered up. Different key combinations show different screen. Press
“V/A” to show real-time metering data; press “E” to show energy parameters; press
“P” to show power parameters; press “H” to show power quality information; press
“H” and “E” together simultaneously to show max/min information, unbalance
and individual harmonics.
press“H” and “V/A” together simultaneously to show basic parameter setting.
press“P” and “V/A” together simultaneously to show DI Status. press“E” and “V/A”
together simultaneously to show TOU Energy.
Note:
No harmonic contents will be displayed in Acuvim-EL and Acuvim-KL.
Press “V/A” to read voltage and current in the metering area. The screen will
proceed to the next display as you press “V/A” each time. It will go back to the
first screen if you press “V/A” at the last screen.
The 1
st
screen: Voltage for each phase: U1, U2 and
U3. As shown in Fig.3-2, U1=380.2 V, U2=380.0 V,
U3=379.8 V.
Load nature is inductive, and communication
status is good.
Note:
Since load nature and communication
status belong to system information, the icons
are displayed on every screen.
ALUM0302
Fig.3-2 Three phase voltage
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.com
