Accora FloorBed 2, Инструкция по эксплуатации

Страница: 9 / 19

© Accora: 01223 206100 | info@accora.uk.com | www.accora.uk.com
9
To activate these options, the magnetic security key
must be swiped across the lower part of the handset,
as shown above by the red box:
First swipe - Handset status indicator light green. The
top 6 buttons, Floor-level safety button and Reverse
Trendelenburg will function. Trendelenburg function will
remain locked.
Second swipe - Handset status indicator light
orange. All 9 buttons now functional, including
Trendelenburg. If the handset is not used it will auto-
lock after a pre-set time. This is called the “SAFETY TIME
OUT” function. The handset status indicator light will
turn off.
Third swipe - Handset status indicator light off. The
handset is now fully locked.
The cycle for light changing is:
 No light – handset locked
 First swipe – green light
 Second swipe – orange light
 Third swipe – no light
The locked and unlocked options may be chosen at
any time depending on the needs of the user.
9. Functionality check
Using the handset test all bed functions and check all
cables for risk of crushing. Refer to section 8 above,
Positioning, for handset controls.
a.
Raise the bed to full height (button 5)
b. Lower the bed until it stops in the Safety Stop
position (button 6)
c. Use the safety double button function to lower the
bed to the Floor-level position (buttons 6 & 7
pressed together)
d. Check all cables for risk of crushing.
e. Lift and lower backrest (buttons 1 & 2)
f. Lift and lower legrest (buttons 3 & 4)
g. Check the reverse Trendelenburg function (head
up, feet down) (button 8). Trendelenburg function
(head down, feet up) (button 9) should not
activate unless this function is unlocked as
described in section 8, Positioning.
Check the correct function of the castors and brake
control. Check all explained functions of the handset.
10. Using the castor brakes
All four castors can be locked by pressing down on the
lower lever of the castors; they can then be unlocked
by pressing down on the top lever of the castors. Care
must be taken to make sure the castor brakes are
always locked when the bed is in use, being
assembled or dismantled so that the bed does not
move accidentally.
Brake locked Brake unlocked
WARNING
Functionality check MUST be carried out by a
competent person.
Check for obstructions around, above and
below the bed frame and position the bed so
that it can operate through the full height
range without any chance of obstruction or
entrapment.
The head end of the bed must be a minimum
of 300mm from the wall and always engage
the brakes when the bed is stopped or left
unattended.