Accora FloorBed 2, Инструкция по эксплуатации

Страница: 10 / 19

10
© Accora: 01223 206100 | info@accora.uk.com | www.accora.uk.com
11. Mattresses selection
All mattresses must be fitted and used in accordance
with the mattresses manufacturer or supplier’s
instructions.
12. Siderail selection
13. Disassembly
1. Remove all accessories, e.g. mattress, side rails, bed
levers etc.
2. Using the handset, raise the mattress platform
approximately 30cm. Loosen the 4 mattress
platform joining bar locking screws. (Do not remove
the R-clips and locking pins at this stage)
3. Fix the backrest an legrest in the flat position with
the Velcro straps provided.
4. Lower the mattress platform to the Floor-level
position and disconnect the power supply.
5. Remove the control box cover and unplug
headboard and footboard lift actuators, legrest
actuator, handset and power supply. Ensure wires
are left free so that the bed can be dismantled
without risk of damage to the wires.
6. Remove the central joining bar R-clips and locking
pins and separate the bed into two halves.
7. Dismantle the headboard/mattress platform head
end and footboard/mattress platform foot end by
removing the R-clips and locking pins.
8. Ensure the disassembled parts are fitted to the
transport bracket in the following order and
positioned as shown in Section 7:
a. Footboard
b. Headboard
c. Mattress platform foot section
d. Mattress platform head section
9.
Ensure all R-clips and pins are refitted so that the
bed on the transport bracket is safe to move.
10. Ensure all wires are secure to prevent damage.
WARNING
Incompatible mattresses can create hazards.
Read instructions for use.
Mattress dimensions must not exceed 2000 x
900 x 200mm. The distance from the top of the
uncompressed mattress to the top of the
siderail must always be greater than 220mm
Where a speciality mattress or mattress
overlay is used and the distance from the top
of the uncompressed mattress to the top of
the siderail is less than 220mm a risk
assessment must be performed to assure
equivalent safety.
WARNING
Only use side rails that are compatible with
this bed as supplied by Accora.
Incompatible siderails can create hazards.
WARNING
Disassembly MUST be carried out by a
competent person.
The bed must be disconnected from the
power supply before disassembly.
Disassembly must take place in a clear,
uncluttered area and children and pets
should be kept away.
If bed has become soiled or contaminated
during use refer to cleaning and disinfection
instructions.
Extreme caution must be taken when moving
the bed on the transport bracket to prevent
the bed tipping over or moving unexpectedly.
Please contact
Accora for
compatible
mattresses.
Incompatible
mattresses can
create hazards.