Accora FloorBed 2, Инструкция по эксплуатации

Страница: 3 / 19

© Accora: 01223 206100 | info@accora.uk.com | www.accora.uk.com
3
GENERAL WARNINGS
1.
Keep this Instruction Manual available for
future reference.
2.
These instructions must be adhered to
ensure the safe and effective use of this
bed and the safety of users and carers.
3.
This bed must be assembled, positioned
and used in accordance with these
instructions.
4.
The safety features for operating the bed
and instructions concerning the bed must
be strictly observed.
5.
This bed must not be exposed to smoke,
naked flame, extreme temperature,
flammable gasses or other hazardous
substances or situations.
6.
Accora shall not be held liable for any
damage, injuries or accidents arising from
unauthorised modifications, non-genuine
spare parts, negligence or use that is at
variance with this manual.
7.
Electrical equipment can be hazardous if
misused or abused. Ensure the electrical
supply cable is not damaged by crushing
and does not create a trip hazard.
8.
Only use side rails, and other accessories,
that are compatible with this bed as
supplied by Accora. Incompatible side
rails can create serious hazards.
9.
Keep children and pets away from this
bed unless supervised by an adult as there
is a risk of injury and/or choking on small
parts.
10.
Do not lower the bed while a hoist that
extends beneath the bed is being used.
Hoist access is obtained when the bed is
raised to 45cm measured from the floor to
the mattress platform base.
11.
When routing cables for other electronic
equipment used with the bed (e.g. air
mattress pump), please ensure cables
cannot be squeezed, crushed or
damaged by the moving parts on the
bed.
12.
The hand control should be positioned to
avoid strangulation risk. Inappropriate use
of the hand control (e.g. kinking, shearing)
could lead to dangerous electric hazards.
The bed must not be used if there is any
visible damage to the handset or cable.
13.
Inappropriate use of the power supply
cord (e.g. kinking, shearing) could lead to
dangerous electric hazards. The bed must
not be used if there is any visible damage
to this cable.
14.
Inappropriate routing of accessory cables,
e.g. mattress air pump cable, could lead
to dangerous electric hazards if the
squeezed or crushed between moving
parts. The bed must not be used if there is
any visible damage to any cables.
15.
The bed should be left in the Floor-level
position when the patient is unattended in
order to reduce risk of injury due to falls.
16.
If using the electronic functions adversely
affects the health of the patient,
disconnect the power supply and only use
the bed in the static mode.
17.
Do not move the bed when it is in the
Floor-level position.
18.
This bed should not be used for
transporting patients.
19.
This bed is typically not suitable for
children unless a risk assessment has been
carried out.
20.
Do not modify this bed without the
authorisation Accora.
21.
Before operating this bed, ensure the
patient is safely positioned to remove the
risks of bed fall, entrapment and
imbalance.
22.
Always check for any entrapment risks
under the bed before lowering to the
Floor-level position.
23.
Electrical installations must meet local
requirements. It is recommended that the
bed is disconnected from the mains
during exceptional cases (i.e. a storm).
24.
Patients, or users, should be risk assessed to
ensure they are able to understand this
manual and to operate FloorBed safely
and without risk to themselves and those
around.
25.
Patients, or users, should only be allowed
to operate the bed independently if they
are able to understand the safety
instructions in this manual and have been
risk assessed as appropriate to do so.
26.
If the combined weight of the mattress
and accessories exceeds 35kg, the
maximum patient weight must be
reduced accordingly.